What are the characteristics of melt - spray cloth extruder

Melt spray cloth in disposable surgical masks with anti-virus effect as the core material, there are usually multiple layers, and the core layer is also an important layer whether disposable masks have anti-virus effect. The disposable medical surgical mask that has the effect of virus prevention really, take off the inner layer, burn with a lighter, its cannot ignite, say with professional noun is melt spray cloth after ignition should be melt effect, do not form flame normally. Melt spraying cloth extruder is the main equipment to produce melt spraying cloth.

The equipment has excellent design, high production, good plasticization, low energy consumption, hard tooth surface gear transmission system, low noise, stable operation, large bearing capacity, long life and other characteristics.

Characteristics of melt spray cloth extruder:

1. Select high-quality extruder reducer for melting and spraying cloth extruder, with stable quality and long life;

2. High-quality Aodi brand frequency conversion motor;

3, electrical automatic control system, technical engineer for the extruder customers according to the specific situation with personalized operation of the automatic control system;

4, single screw extruder simple design, low price.

Melt-blown cloth out of each production line equipped with crew extruder of how much is the layer and the layer of regulation, such as multiple layers membrane production line is equipped with two extruder (surface for the same kind of material), and is equipped with three extrusion machine (layers of material are different), and 5 layers as the membrane is equipped with three extrusion machine, and is equipped with four extrusion machine. It has the unique characteristics of widely used in respirator filter material, heat insulation filling material, medical eisai, wiping materials, finished products as the core of respirators materials can pass the N95 standards on the basis of the high quality of high speed, high yield and squeeze out the design concept of plasticizing at low temperature, to ensure the high quality product out two cascade overall design, strengthen plasticizing effect, to ensure that special barrier, regulating efficient characteristics of extrusion BM comprehensive mixed design, ensure material mixing effect of the high torque output, large thrust bearing, gear shaft for high carbon steel toughness, carburizing, grinding processing high toughness, high smoothness, low noise PLC intelligent control, It can complete the linkage between the main and auxiliary machines and facilitate the man-machine interface for monitoring, so as to understand the processing and mechanical conditions. The operation method (temperature control meter) can be changed according to needs. The material is 38CrMoAL/A nitriding treatment.